kubestr on Digi Hunch

Kubernetes Storage on Azure 3 of 3 – Ceph by Rook

Fri, 26 Aug 2022 19:43:00 -0400

In the last two posts, I covered the native storage options on Azure Kubernetes Service, as well as Portworx as an example of a proprietary Software Defined Storage (SDS) solution. There are also a number of open-source alternative SDS solutions. Ceph has nearly a decade of history from prior to containerization, and is the most widely adopted storage platform. In this post, we continue to explore Ceph as an open-source storage solution on Azure Kubernetes.

Ceph by Rook

Ceph is an open-source SDS platform for distributed storage on a cluster and provides object, block and file storage. Installation of Ceph SDS can be complex, especially on Kubernetes platform. Rook is a graduated CNCF project to orchestrate storage platform. Rook by itself is not SDS and it supports:

Ceph: configure a Ceph cluster. Think of this as the equivalent of cephadm on Kubernetes platform.
NFS: configure an NFS server. Think of this as the equivalent of nfsd daemon on Kubernetes platform.
Cassandra: an operator to configure a Cassandra database cluster. It is now deprecated.

We play with Rook Ceph. I also refer to it as Ceph by Rook. The contribution of Rook project is it simplifies the installation as a matter of declaring custom resources using CRDs. Here are some high-level CRDs to know:

CephCluster: creates a Ceph storage cluster
CephBlockPool: represents a block pool
CephFilesystem: represents a file system
CephObjectStore: represents an object store
CephNFS: spins up a NFS Ganesha server to export NFS shares of a CephFilesystem or CephObjectStore.

As with typical Kubernetes resources in controller pattern, Ceph by Rook needs an operator along with custom resources. We can use YAML manifest for both of them, and the manifests are usually very tediously long. We can also use Helm to install both of them, by providing a value file. Now we will install Ceph on AKS.

Install Ceph Operator on AKS

The steps are influenced by two relevant posts (here and here). However, I’ve incorporated the cluster configuration in the Azure directory of the cloudkube project, a modular Terraform template to configure AKS cluster and facilitate storage configuration. The node group and instance sizes are selected to be just enough to run a ceph POC cluster with minimum cost. One of the node groups is tainted with storage-node, as if the following command were run:

kubectl taint nodes my-node-pool-node-name storage-node=true:NoSchedule

You will only need to taint the nodes with the command above if you choose not to use the cloudkube template. The taint ensures that only Pods with corresponding toleration and effect can be scheduled to those nodes.

We use Helm to install Rook Operator. We need a value file (e.g. rook-ceph-operator-values.yaml) with content as below:

# https://github.com/rook/rook/blob/master/Documentation/Helm-Charts/operator-chart.md
crds:
 enabled: true
csi:
 provisionerTolerations:
 - effect: NoSchedule
 key: storage-node
 operator: Exists
 pluginTolerations:
 - effect: NoSchedule
 key: storage-node
 operator: Exists
agent:
 # AKS: https://rook.github.io/docs/rook/v1.7/flexvolume.html#azure-aks
 flexVolumeDirPath: "/etc/kubernetes/volumeplugins"

Then we install the operator with Helm:

helm install rook-ceph-operator rook-ceph --namespace rook-ceph --create-namespace --version v1.9.6 --repo https://charts.rook.io/release/ --values rook-ceph-operator-values.yaml
kubectl -n rook-ceph get po -l app=rook-ceph-operator

After installing the operator, we check the Pod status to make sure it is running. Then we can install the actual Ceph Cluster in one of the two ways. We can declare a CephClusterCRD ourself, or we can use Helm again to declare the CRD. Helm Chart gives us a lot of useful default values and saves us from editing a large body of YAML manifest.

Install Ceph CR on AKS

We use Helm to install CephCluster CRD. We create a value file (e.g. rook-ceph-cluster-values.yaml) with content as below:

# https://github.com/rook/rook/blob/master/Documentation/Helm-Charts/ceph-cluster-chart.md
operatorNamespace: rook-ceph
toolbox:
 enabled: true
cephObjectStores: [] # by default a cephObjectStore will be created. Setting this to null disables it
#cephBlockPools: # by default a cephBlockPool will also be created with default values
#cephFileSystems: # by default a cephFileSystem will also be created with default values

cephClusterSpec:
 mon:
 count: 3
 volumeClaimTemplate:
 spec:
 storageClassName: managed-premium
 resources:
 requests:
 storage: 10Gi
 resources:
 limits:
 cpu: "500m"
 memory: "1Gi"
 requests:
 cpu: "100m"
 memory: "500Mi"
 dashboard:
 enabled: true
 storage:
 storageClassDeviceSets:
 - name: set1
 # The number of OSDs to create from this device set
 count: 3
 # IMPORTANT: If volumes specified by the storageClassName are not portable across nodes
 # this needs to be set to false. For example, if using the local storage provisioner
 # this should be false.
 portable: false
 # Since the OSDs could end up on any node, an effort needs to be made to spread the OSDs
 # across nodes as much as possible. Unfortunately the pod anti-affinity breaks down
 # as soon as you have more than one OSD per node. The topology spread constraints will
 # give us an even spread on K8s 1.18 or newer.
 placement:
 topologySpreadConstraints:
 - maxSkew: 1
 topologyKey: kubernetes.io/hostname
 whenUnsatisfiable: ScheduleAnyway
 labelSelector:
 matchExpressions:
 - key: app
 operator: In
 values:
 - rook-ceph-osd
 tolerations:
 - key: storage-node
 operator: Exists
 preparePlacement:
 tolerations:
 - key: storage-node
 operator: Exists
 nodeAffinity:
 requiredDuringSchedulingIgnoredDuringExecution:
 nodeSelectorTerms:
 - matchExpressions:
 - key: agentpool
 operator: In
 values:
 - storagenp
 topologySpreadConstraints:
 - maxSkew: 1
 # IMPORTANT: If you don't have zone labels, change this to another key such as kubernetes.io/hostname
 topologyKey: topology.kubernetes.io/zone
 whenUnsatisfiable: DoNotSchedule
 labelSelector:
 matchExpressions:
 - key: app
 operator: In
 values:
 - rook-ceph-osd-prepare
 resources:
 limits:
 cpu: "500m"
 memory: "4Gi"
 requests:
 cpu: "500m"
 memory: "2Gi"
 volumeClaimTemplates:
 - metadata:
 name: data
 spec:
 resources:
 requests:
 storage: 100Gi
 storageClassName: managed-premium
 volumeMode: Block
 accessModes:
 - ReadWriteOnce

During the cluster provisioning, there will be a number of preparing Pods. We want those Pods to run on nodes with label agentpool=storagenp. In real life, we need to orchestrate where to run each workload, by restricting the nodes to schedule certain types of workload.

Then we can install the cluster using Helm:

helm install rook-ceph-cluster rook-ceph-cluster --namespace rook-ceph --create-namespace --version v1.9.6 --repo https://charts.rook.io/release/ --values rook-ceph-cluster-values.yaml

After running the Helm install, it may take as long as 15 minutes for all resources to settle. Watch the Pod status in rook-ceph namespace. At the end, make sure that the cluster is created successfully:

kubeadmin@pro-sturgeon-bastion-host:~$ kubectl -n rook-ceph get CephCluster
NAME DATADIRHOSTPATH MONCOUNT AGE PHASE MESSAGE HEALTH EXTERNAL
rook-ceph /var/lib/rook 3 15m Ready Cluster created successfully HEALTH_OK
kubeadmin@pro-sturgeon-bastion-host:~$ kubectl -n rook-ceph get cephBlockPools
NAME PHASE
ceph-blockpool Ready
kubeadmin@pro-sturgeon-bastion-host:~$ kubectl -n rook-ceph get cephFileSystems
NAME ACTIVEMDS AGE PHASE
ceph-filesystem 1 20m Ready

In my case it took 15 minutes before the cluster comes up as created successfully. You should notice that two storage classes were also created as a part of the install. It however did not create a storage class or CRD for object storage, because we explicitly disabled it in the Helm value file by setting cephObjectStores value to null.

Dashboard

We enabled dashboard. To configure the dashboard view properly, we would need an ingress. For a quick view here, we can play port forwarding tricks. First we fetch the admin password for use in the next step. Then expose the dashboard to the bastion host:

$ kubectl -n rook-ceph get secret rook-ceph-dashboard-password -o jsonpath='{.data.password}' | base64 -d
$ kubectl -n rook-ceph port-forward svc/rook-ceph-mgr-dashboard 8443:8443

Since I don’t have UI on the bastion host, I use the port forwarding trick again from my own MacBook. Start a new terminal and SSH to the bastion host with port-forwarding switch:

$ ssh -L 8443:localhost:8443 kubeadmin@20.116.132.8

The command above suppose the public IP of the bastion host is 20.116.132.8. Then from my MacBook I can browse to localhost:8443 (with Safari browser which gives me the option to bypass certificate error). At the web portal, provide username (admin) and password (as retrieved above):

Ceph console for Kubernetes

Apart from the dashboard, we can also use ceph admin tool from a toolbox pod, following this instruction. For monitoring, Ceph by Rook can expose metrics for Prometheus to scrape.

Performance

With default ceph configuration on AKS, I ran quick performance test using kube-str . The result is as follows:

	read_iops	write_iops	read_bw	write_bw
ceph-block	IOPS=464.507294 BW(KiB/s)=1874	IOPS=243.296143 BW(KiB/s)=989	IOPS=509.928162 BW(KiB/s)=65797	IOPS=248.530762 BW(KiB/s)=32338
ceph-filesystem	IOPS=438.701324 BW(KiB/s)=1770	IOPS=226.270660 BW(KiB/s)=920	IOPS=405.936340 BW(KiB/s)=52456	IOPS=208.869293 BW(KiB/s)=27229

The metrics reflects performance under default configuration. It should not be considered as the best performance that Ceph can deliver on Azure Kubernetes.

Summary

I discussed three storage options for Azure Kubernetes but the idea applies to other Kubernetes platform hosted on a CSP. The native storage has significant limitation. NFS has latency. Block storage does not address high availability at the storage layer. Portworx and LINSTOR fill that gap as a commercial solution. Ceph is based on Object storage.

Kubernetes Storage on Azure 2 of 3 – Portworx

Fri, 12 Aug 2022 15:23:00 -0400

In the previous post, we have discussed built-in storage classes on Azure Kubernetes. Further to that, we will examine some third-party software defined storage (SDS) options that are compatible with Azure Kubernetes Service in this post. Then we take Portworx on Azure as an example. Although, these options are specific to Azure, most of the players also have solutions for other managed Kubernetes platforms. Also, the methodology to study storage options remain the same regardless of cloud service provider.

In fact, I touched on software defined storage (SDS) in the context of general non-containerized workload in a separate post. In short, storage providers decouple the SDS appliance from the full storage solution in order to lower the cost and increase flexibility. To the storage consumer (e.g. a process running on Linux OS), SDS can present a block disk or file system. There are also SDS solution that can host your own object storage and we will discuss that later. In fact, SDS has gained significant popularity in recent years. For example, the report “Validating Software-Defined Storage Operating Models for the Enterprise” by archiectingit divided the evolution into four phases and cited that Gartner predicts the SDS revolution to reach 50% of the storage market by 2024, from 15% in 2020.

This post discusses SDS in the context of container storage. Then we will install Portworx on Azure Kubernetes.

SDS for Kubernetes

Many SDS appliances also developed the capability to present storage volumes to containerized workload. I put together a list of SDS products that works on Azure with their supported access modes:

Solution	Licence	Development and Support	Access Mode
Portworx	Closed source. Free Essential tier. Enterprise features on License.	Commercially supported by PureStorage	RWO, RWX
Ceph by Rook	Open source. Rook is a graduated CNCF project.	Developed and commercially supported by Red Hat, Canonical and SoftIron	RWO, ROX, RWX
OpenEBS	Open source. Sandbox CNCF project.	Developed and commercially supported by MayaData et al.	RWO
Longhorn	Open source. Incubating CNCF project.	Originally developed by Rancher, and commercially supported by SUSE	RWO
StorageOS	Closed source. License required.	Commercial support by Ondat.	RWO
LINBIT	Open-source with enterprise plans	Enterprise support

RWO is the most commonly supported mode. The report “Performance Benchmarking Cloud Native Storage Solutions for Kubernetes” makes a comparison of performance among some of the options in early 2021. Another potentially opinionated comparison list is by LINBIT.

Portworx is a leading player with commercial SDS solution and I will test its free Essential tier in the rest of this post. Ceph is one of the most mature leading open-source offering and I will test it in the next post.

For Portworx, we can use the terraform template cloudkube for Azure. The template assigns the kubelet’s managed identity as contributor of the node resource group. The template also creates a bastion host with direct SSH access to the nodes.

Portworx Operator on Azure

We use Portworx Operator to configure storage cluster. Portworx has an instruction for AKS but it is not tailored to specific identity model. For simplicity, use my cloudkube Terraform template to create the AKS cluster, and skip the “Prepare Your AKS Platform” page. Instead, follow the “Deploy Portworx using Azure managed identity on new AKS cluster” page starting at step 7.

At that step, we need to create a secret with the client ID of the managed identity for node agent. The terraform template outputs the BYO identity’s client ID. After cluster creation, we simply SSH to the bastion host and create the secret using the output.

To install Porworx using operator, we can follow a wizard in PX-central. If this is the first time, we need to create an account and log in to the portal. If this is not the first time and you have previously created a cluster, you need to detach that cluster by going to Profile from bottom left corner on the portal page.

Follow the guide in “Install Portworx on AKS using the Operator“. In the wizard, click on “Portworx Essentials” for free tier, or “Portworx Enterprise” for the 30-day trial. Then select operator with latest version. In the rest of the wizard steps, select options applicable to Azure environment. The last step will present two kubectl commands to install operator and install the CR. Run the command to install operator and verify result:

kubectl apply -f 'https://install.portworx.com/2.9?comp=pxoperator'
kubectl -n kube-system get deployment portworx-operator

Portworx Custom Resource

To install the CR, we need to customize the given manifest in order to use our managed identity. We can download the YAML manifest (portworx_essentials.yml) and modify it in text editor. As the page “Deploy Portworx using Azure managed identity on new AKS cluster” suggest at step 9: in the env section, remove the AZURE_CLIENT_SECRET and AZURE_TENANT_ID sections but keep the AZURE_CLIENT_ID section. My CRD declaration looks like this:

# SOURCE: https://install.portworx.com/?operator=true&mc=false&kbver=&oem=esse&user=myuserid&b=true&kd=type%3DPremium_LRS%2Csize%3D150&s=%22type%3DPremium_LRS%2Csize%3D150%22&c=my-very-long-px-cluster-id&aks=true&stork=true&csi=true&mon=true&tel=false&st=k8s&promop=true
kind: StorageCluster
apiVersion: core.libopenstorage.org/v1
metadata:
 name: my-very-long-px-cluster-id
 namespace: kube-system
 annotations:
 portworx.io/install-source: "https://install.portworx.com/?operator=true&mc=false&kbver=&oem=esse&user=myuserid&b=true&kd=type%3DPremium_LRS%2Csize%3D150&s=%22type%3DPremium_LRS%2Csize%3D150%22&c=my-very-long-px-cluster-id&aks=true&stork=true&csi=true&mon=true&tel=false&st=k8s&promop=true"
 portworx.io/is-aks: "true"
 portworx.io/misc-args: "--oem esse"
spec:
 image: portworx/oci-monitor:2.10.2
 imagePullPolicy: Always
 kvdb:
 internal: true
 cloudStorage:
 deviceSpecs:
 - type=Premium_LRS,size=150
 kvdbDeviceSpec: type=Premium_LRS,size=150
 secretsProvider: k8s
 stork:
 enabled: true
 args:
 webhook-controller: "true"
 autopilot:
 enabled: true
 monitoring:
 prometheus:
 enabled: true
 exportMetrics: true
 featureGates:
 CSI: "true"
 env:
 - name: AZURE_CLIENT_ID
 valueFrom:
 secretKeyRef:
 name: px-azure
 key: AZURE_CLIENT_ID
---
apiVersion: v1
kind: Secret
metadata:
 name: px-essential
 namespace: kube-system
data:
 px-essen-user-id: aaaabbbbccccddddmyverylongpxessenuserid
 px-osb-endpoint: ssssssyyyyyyyzzzzzzmyverylongpxosbendpoint

In this custom resource manifest, I specify to get the cluster to create disk from Azure, even though it has the capability of using an existing disk. Then apply the CRD manifest:

 kubectl apply -f portworx_essentials.yml

This will take up to 10 minutes to create several related resources. There are several check points to ensure the cluster is created successfully. Here are some useful commands:

kubectl -n kube-system get po # all Pods related to portworx should be ready and running, especially the portworx-api ones
kubectl -n kube-system get storagecluster # the status should report online
PX_POD=$(kubectl get pods -l name=portworx -n kube-system -o jsonpath='{.items[0].metadata.name}') 
# get the name of one of the portworx Pod for storage cluster
kubectl -n kube-system exec -c portworx -it $PX_POD --tty --stdin -- /opt/pwx/bin/pxctl status 
# should report "Status: PX is operational" with valid license loaded
kubectl get sc # portworx related storage classes are available

The pre-built storage classes are not CSI based. However, CSI should be automatically enabled in recent operator versions. We should create our own CSI storage classes and PVCs using our own storage classes. Here are two examples:

kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
 name: px-csi-database
provisioner: pxd.portworx.com
parameters:
 repl: "2"
 priority_io: "high"
 io_profile: "db"
---
kind: StorageClass
apiVersion: storage.k8s.io/v1
metadata:
 name: px-csi-artifact
provisioner: pxd.portworx.com
parameters:
 repl: "2"
 priority_io: "medium"
 io_profile: "sequential"

That is a bare minimum Portworx installation. Check out their documentation for the full features. With this minimum install we can go to the section “Validate Persistent Storage” from the previous post to validate the persistent volume.

For troubleshooting purpose, pxctl is the utility and it is available on Portworx Pods.

Performance

We care not only the functionality, but also the performance. So I ran a quick performance test using kube-str, using all default configuration. The result is as follows:

	read_iops	write_iops	read_bw	write_bw
px-csi-database	IOPS=969.614136 BW(KiB/s)=3894	IOPS=729.698059 BW(KiB/s)=2935	IOPS=1172.772827 BW(KiB/s)=150639	IOPS=691.626526 BW(KiB/s)=89053
px-csi-artifact	IOPS=780.681946 BW(KiB/s)=3139	IOPS=682.522766 BW(KiB/s)=2746	IOPS=773.548584 BW(KiB/s)=99549	IOPS=659.015320 BW(KiB/s)=84890

Note that those numbers reflect performance under default configuration, and they should not be considered as the best performance that Portworx can deliver on Azure Kubernetes. Before moving to production, it is important to establish your own test parameters that best represents the container workload, and then iterate through different parameters for the storage class based on the requirement and performance output.

Kubernetes Storage on Azure 1 of 3 – built-in storage and NFS

Sun, 31 Jul 2022 15:22:00 -0400

In the previous post, we understand that to host stateful workload, we need to manage persistent storage to the Kubernetes platform. In this post, I will explore the different storage options. These options are specific to Azure Kubernetes service. However, the principals apply to any Kubernetes platform regardless of cloud vendor.

In another old post, I discussed in-tree and CSI storage classes, and from a developer’s perspective, how to mount volumes statically and dynamically once the storage class is available. Here in this post we are concerned with how to make storage classes available, from a platform specialist perspective.

Storage in Azure Kubernetes

As soon as the Azure Kubernetes cluster is launched, a number of built-in storage classes are available. Unlike third-party storage classes, they do not require kubelet identity to be contributor for node resource group. As discussed we shall use CSI based storage classes.

managed-csi
managed-csi-premium
azurefile-csi
azurefile-csi-premium

The main difference between them is the backing technology. However, form Kubernetes workload’s perspective, the Pods as storage consumers are concerned with the access mode instead of backing technology. Here are supported access modes:

ReadWriteOnce: read-write by a single node
ReadOnlyMany: read only by many nodes
ReadWriteMany: read-write by many nodes
ReadWriteOncePod: new in Kubernetes 1.22 to restrict volume access to a single Pod

The storage classes managed-csi and managed-csi-premium support ReadWriteOnce. The storage classes azurefile-csi and azurefile-csi-premium support ReadWriteMany.

Apart from these built-in options, Azure also suggests a few more options based on other types of Azure resources. For example, AKS can integrate with HPC cache and it for HPC. We can also self-manage a virtual machine configured as NFS server, and use the NFS subdir external provisioner to configure storage class. Despite of the overhead with managing a VM, you have more configurability. My previous client reports that they gain better performance than the built-in options.

Another alternative is Azure NetApp Files. However, being a full enterprise grade solution (similar to FSx ONTAP), Azure NetApp Files costs an arm and a leg. In this comparison, it cost 60 to 100 times as the cost by built-in options.

Another option is Azure Ultra Disk, which needs to be enabled at cluster level. You can provision performance target (DiskIOPSReadWrite and DiskMBpsReadWrite) in the storage class. Ultra Disk is a good middle ground between the pricey NetApp files and the less performant built-in options.

Terraform Template for AKS

To explore the storage options, I use my own terraform template to create an AKS cluster. The template is in the azure directory of the cloudkube repo. The template consists a few configurations with Azure Kubernetes to facilitate storage configuration. First, it configures an SSH key pair to use between the bastion host and the node. Users can SSH to Kubernetes nodes from bastion host as soon as terraform apply is completed. Second, the third party storage options installed after the cluster creation need their Pod to instruct Azure to create Azure disks. This requires that a Kubernetes node agent have the permission to provision resources in the node resource group. This is important to understand because there are a couple of managed identities at play (refer to this post) when building an AKS cluster.

In Azure Kubernetes, it is the managed identity of kubelet, that needs to have contributor permission over the resource group for the nodes (not the one for the AKS cluster itself). A managed identity is expressed by a client ID, an object ID (aka principal ID), and the identity ID. We can find them out with an AZ CLI command as below:

We can also tell that the kubelet managed identity represents node agent, by connecting to a node and looking at the argument (kubernetes.azure.com/kubelet-identity-client-id) of kubelet process:

In the template, I also chose to designate the same BYO identity for both the cluster and for kubelet (node agent), in order to minimize my requirement on permission. If I had left it with a system assigned identity for node agent, I would have to assign that identity as a contributor for the node resource group, either as a user, or via Terraform’s identity. Either way, it is beyond what a Contributor is allowed to do.

Benchmarking with kubestr

I used fio utility for storage benchmarking from virtual machines. However, fio utility is not for container. For fio testing on Kubernetes, I’d have to use a Docker image, and test with target volume attached. Fortunately, the Kasten team shared their initiative in the open source project Kubestr. The kubestr release is available as an executable on common platforms. It connects to the cluster the same way as kubectl and here is a demo. To begin with, download the utility to bastion host, and run it without any argument, which prints the storage classes and volume snapshot classes:

curl -L -o kubestr.tar.gz https://github.com/kastenhq/kubestr/releases/download/v0.4.31/kubestr_0.4.31_Linux_amd64.tar.gz
tar -xvf kubestr.tar.gz && rm kubestr.tar.gz && chmod +x kubestr

./kubestr # if kubectl is configured, this command will print out the details of storage classes and volume snapshot classes

In addition to outputting details, it is also very simple to perform storage benchmarking with kubestr. All we need to do is giving it the storage class name and it will run four tests by default with common global options (ioengine=libaio verify=0 direct=1 gtod_reduce=1). The four tests are:

JobName	block_size	filesize	iodepth	rw
read_iops	4k	2G	64	randread
write_iops	4k	2G	64	randwrite
read_bw	128k	2G	64	randread
write_bw	128k	2G	64	randwrite

During each test, it measures and reports IOPS and bandwidth (throughput). If your I/O profile falls out of the four jobs, you can even customize your test by supplying a fio config file. For example, you need a longer test duration, or you need a larger total size for the test. Before the test, kubestr automatically mount their test volumes using the storage class being tested.

./kubestr fio -s my-storage-class # benchmarking a storage class

For read_iops and write_iops, we mainly look at the IOPS. For read_bw and write_bw, we mainly look at the bandwidth. The iops and bw based on samples are reported as first line of result, followed by min, max and average.

Metrics

With kubestr I ran a performance test amongst the native storage classes with Azure Kubernetes Service, with results as below:

	read_iops	write_iops	read_bw	write_bw
managed-csi	IOPS=314.729797 BW(KiB/s)=1275	IOPS=297.071136 BW(KiB/s)=1204	IOPS=315.311188 BW(KiB/s)=40887	IOPS=261.048645 BW(KiB/s)=33941
managed-csi-premium	IOPS=493.395844 BW(KiB/s)=1990	IOPS=426.731812 BW(KiB/s)=1723	IOPS=455.950348 BW(KiB/s)=58894	IOPS=422.888855 BW(KiB/s)=54662
azurefile-csi	IOPS=259.333282 BW(KiB/s)=1053	IOPS=283.985779 BW(KiB/s)=1152	IOPS=240.447403 BW(KiB/s)=31298	IOPS=230.689804 BW(KiB/s)=30048
azurefile-csi-premium	IOPS=394.044739 BW(KiB/s)=1586	IOPS=371.181793 BW(KiB/s)=1494	IOPS=380.360535 BW(KiB/s)=49018	IOPS=491.313446 BW(KiB/s)=63310

These numbers are based on default test parameters (e.g. 100Gi PVC size). The numbers indicate that block storage generally performs better in default setting. So we should use managed disk instead of azure file unless multiple pods needs to access the same volume.

Validate Persistent Storage

We can use mysql as a quick and dirty test of storage classes. We can deploy the following manifest:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
 name: mysql-pvc
spec:
 storageClassName: managed-csi-premium # the storage class being tested
 accessModes:
 - ReadWriteOnce
 resources:
 requests:
 storage: 5Gi
---
apiVersion: v1
kind: Secret
metadata:
 name: mysql
data:
 password: eHl6  # base64 code of xyz
---
apiVersion: apps/v1
kind: Deployment
metadata:
 name: mysql
 labels:
 app: mysql
spec:
 replicas: 1
 selector:
 matchLabels:
 app: mysql
 template:
 metadata:
 labels:
 app: mysql
 spec:
 containers:
 - image: mysql:5.6
 name: mysql
 env:
 - name: MYSQL_ROOT_PASSWORD
 valueFrom:
 secretKeyRef:
 name: mysql
 key: password
 ports:
 - containerPort: 3306
 name: mysql
 volumeMounts:
 - name: mysql-persistent-storage
 mountPath: /var/lib/mysql
 volumes:
 - name: mysql-persistent-storage
 persistentVolumeClaim:
 claimName: mysql-pvc
---
apiVersion: v1
kind: Service
metadata:
 name: mysql-service
 labels:
 service: mysql
spec:
 selector:
 app: mysql
 ports:
 - name: tcp-mysql
 protocol: TCP
 port: 3306
 targetPort: 3306

Once the Pod has been created, then we use a throw-away Pod to connect to mysql service and build some data:

$ kubectl run mysql-cli --rm -i --tty --image imega/mysql-client -- /bin/sh
If you don't see a command prompt, try pressing enter.
/ # mysql --host=mysql-service.default.svc.cluster.local --user=root --password=xyz
Welcome to the MariaDB monitor. Commands end with ; or \g. Your MySQL connection id is 9 Server version: 5.6.51 MySQL Community Server (GPL) Copyright (c) 2000, 2018, Oracle, MariaDB Corporation Ab and others. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. MySQL [(none)]>

From the mysql shell, we create a test database with dummy data populated:

CREATE DATABASE `testdb`; 
USE testdb; 
CREATE TABLE IF NOT EXISTS tasks ( 
 task_id INT AUTO_INCREMENT PRIMARY KEY, 
 title VARCHAR(255) NOT NULL, 
 description TEXT, 
 created_at TIMESTAMP DEFAULT CURRENT_TIMESTAMP 
) ENGINE=INNODB; 
INSERT INTO tasks (title, description) VALUES ('Job A','Morning Standup');
INSERT INTO tasks (title, description) VALUES ('Job B','Latte with two shots of espresso');
INSERT INTO tasks (title, description) VALUES ('Job C','Coding coding and coding');
INSERT INTO tasks (title, description) VALUES ('Job D','git commit');

Each SQL command should return with number of rows affected and then we can exit the MySQL shell and Pod shell. Once we exit out of the Pod shell, the Pod is deleted. We can re-connect to validate the data are still present:

$ kubectl run mysql-tester --rm -i --tty --image imega/mysql-client -- mysql --host=mysql-service.default.svc.cluster.local --user=root --password=xyz --database testdb --execute='SELECT * FROM tasks;'
If you don't see a command prompt, try pressing enter.
Got error: Access denied for user 'root'@'147.206.3.15' (using password: NO)
+---------+-------+----------------------------------+---------------------+
| task_id | title | description | created_at |
+---------+-------+----------------------------------+---------------------+
| 1 | Job A | Morning Standup | 2022-06-22 20:29:12 |
| 2 | Job B | Latte with two shots of espresso | 2022-06-22 20:29:12 |
| 3 | Job C | Coding coding and coding | 2022-06-22 20:29:12 |
| 4 | Job D | git commit | 2022-06-22 20:29:13 |
+---------+-------+----------------------------------+---------------------+
Session ended, resume using 'kubectl attach mysql-tester -c mysql-tester -i -t' command when the pod is running
pod "mysql-tester" deleted

The output validates the persistent storage of the data. When testing a different storage class, simply start over with a different storage class specified in the PVC part of the manifest.

Summary

This post focuses on storage options for persistent volumes on Azure Kubernetes service. I use my own Terraform template with some custom configuration. I also covered kubestr as benchmarking tool and ran it against the built-in storage classes.

In some situations, the built-in options do not suit your needs. For example, you might want your application to use persistent volume in a consistent way across multiple cloud vendors. We will have to resort to third-party software defined storage layer. In the next post, I will explore a couple of SDS-based options, namely Portworx and Ceph. The custom configurations in the Terraform template will be helpful when we configure Portworx.