Data Plane on Digi Hunch

EKS impression

Fri, 23 Dec 2022 18:18:19 -0400

I’ve worked on a few AKS projects previously. Since I joined AWS I wanted to put aside some time to check out EKS (Elastic Kubernetes Service). Here in this post, I put down my first impression on EKS, and also share my Terraform template in cloudkube project to create an EKS cluster.

Similar to AKS, EKS exposes API endpoint and the control plane components are hidden from AWS users. When creating EKS cluster it does not create the underlying VPC and subnets. Therefore, you have create an existing VPC and at least two subnets ahead of time, and specify them during EKS creation. Bear in mind that there is a list of requirement for the VPC and subnets.

In the cluster, the CNI that EKS officially supports is Amazon VPC CNI plugin. It is available as an add-on. Similar to Azure CNI, each Pod gets its own IP address. In addition, EKS supports other compatible CNI plugins such as Calico, Cilium, Weave Net and Antrea.

Computing Nodes in EKS

There are three modes to address computing capacity: self-managed nodes, EKS managed node groups and AWS Fargate. The documentation has a comparison table.

With self-managed nodes, users create EC2 instances separately and then register them to the control plane. The instances must use the same IAM role and AMI. You can use Auto Scaling groups of Bottlerocket (AWS-sponsored purpose-built Linux distro for container host) nodes. The self-managed node option is mostly for AWS outpost customers who bring in their own computing capacity from data centre.

If you provision computing capacity from AWS, it makes sense to assign EKS managed node groups when creating EKS cluster. We can turn on Cluster Autoscaler, a Kubernetes construct to manage the auto scaling of node groups. Sometimes we want to have more than one node groups. For example, to build a multi-architecture cluster, we need one node group with amd64 nodes and the other with arm64 nodes (e.g. instances with Graviton processor). In general, arm-based CPU delivers better performance with less power consumption and the industry is slowly moving towards more arm-based CPU architecture.

Fargate is what I call managed computing service for EKS. With Fargate you do not need to tweak Cluster Autoscaler to self-manage computing capacity. The Fargate documentation has a long list of considerations. For example, Pods must match a Fargate profile (here‘s an example) at the time that they’re scheduled to run on Fargate. So we need to build Fargate profile and Pod labelling properly. Also, Fargate does not support DaemonSet. Another big consideration is that Fargate does not support non-VPC CNI. In my opinion these are pretty significant limitations. Many workloads (system-level or application-level) would need Daemonset (e.g. kube-proxy, some CNI or CSI drivers, Dynatrace monitoring).

The pro of Fargate is the serverless computing model. The construct of a Fargate profile isn’t complicated. You just specify subnets, namespace and labels. However, the downside is the long list of considerations. Some teams may consider these restrictions too much. The other overhead is the need to manage Fargate profile to ensure all Pods are scheduled somewhere.

To me, using Fargate alone impairs portability of workload. The good thing is that Fargate and Managed Node Group are not mutually exclusive on a cluster. In most cases, we can go partially serverless, and reap the benefits of both of them.

Node AutoScaling

For workloads that don’t have a matching Fargate profile, we have to figure out node autoscaling ourselves. I touched on Cluster Autoscaler in “Autoscaling on Kubernetes Platform“. CA works on AWS as well and is triggered upon a Pod coming to unschedulable status in Scheduler. There is some limitations though. For example, CA interacts with Autoscaling Group (instead of EC2 instances directly). When it determines it’s time to scale up, it bumps up the desired capacity by one at a time in the Autoscaling group. The configurations in Autoscaling group may also be at play and CA do not have direct control. For example, the “scaling cooldown“. The pool of nodes is homogenous as per the pre-configured launch template and CA has no control. If a Pod requires a different type of node (e.g. ARM64 CPU, spot instance, etc), then we’d first have to create a node group with the desired node type. Moreover, in the worst cases, one-at-a-time scale-up does not meet the increase of demand driven by Pod increases, causing nuances such as racing conditions.

Because the Cluster Autoscaler doesn’t really deal with the nodes themselves, this kind of integration is clunky and slow. Nearly half of Kubernetes customers on AWS report that configuring cluster auto scaling using the Kubernetes Cluster Autoscaler is challenging and restrictive, according to this blog post. As a result, AWS launched an open-source cluster autoscaler project, Karpenter. Karpenter first only supported EKS but now the support includes other CSPs. For EKS, Karpenter directly interact with different types of EC2 instances.

Karpenter makes node scaling work in a more cloud-native manner. In the presence of unschedulable Pods, Karpenter bypasses the Kubernetes scheduler and works directly with the Cloud provider, to launch the minimal compute resources needed to fit those Pods and immediately binds the Pods to the newly provisioned Nodes without waiting for scheduler. As Pods are removed or rescheduled to other nodes, Karpenter looks for opportunities to terminate under-utilized nodes. Karpender defines a CR called Provisioner to specify node provisioning configuration, such as instance size, zone, CPU architecture, etc. It is a manifest that describes a node group so the node scaler is aware of all the available node types. You can have multiple Provisioners for different needs, just like node groups. The Provisioner CR can also set TTL for empty Nodes, such that once a Node has no pods other than DaemonSet, Karpenter will terminate the Node on TTL expiry.

Karpenter’s idea is similar to the idea of AutoPilot cluster in GKE. The new EKS workshop has an section on how to set up CA and Karpenter in practice.

Identity Management for EKS

For IAM, we need to be concerned with three aspects. The management traffic to the cloud service, the management traffic for Kubernetes cluster and business traffic.

Traffic type	AWS	Azure
I. Cloud Service Endpoint (Management Traffic for Cloud Service)	AWS IAM identity	Azure RBAC
II. Kubernetes API (Management Traffic for K8s Cluster)	IAM mapping or OIDC	Azure RBAC (implementation of OIDC)
III. Business traffic	Up to Kubernetes Ingress	Up to Kubernetes Ingress

For business traffic (type III), it is all up to the Ingress. I’ve written another article on managing ingress traffic on Kubernetes platforms. We interact with cloud service endpoint (type II) with either AWS CLI or Terraform, to create any object, including resources needed for a cluster. This is generally how we work with cloud service, not specific to Kubernetes. Usually the IAM identity assumes another IAM role, which empowers it with a lot of permissions.

For access to Kubernetes API (type III), EKS supports OIDC and IAM mapping. AWS documentation refers to this as “Cluster Authentication“. There is one special scenario where your identity for type II access inherits your identity for type I access. As the document puts:

When you create an Amazon EKS cluster, the AWS Identity and Access Management (IAM) entity user or role, such as a federated user that creates the cluster, is automatically granted system:masters permissions in the cluster’s role-based access control (RBAC) configuration in the Amazon EKS control plane. This IAM entity doesn’t appear in any visible configuration, so make sure to keep track of which IAM entity originally created the cluster.

This special scenario (I call it the “implicit master user“) allows us to perform critical activities on the cluster, such as creating IAM mapping, or OIDC configuration.

The above addressed how AWS resource access Kubernetes resource. On the other hand, to address how a Kubernetes resource access AWS resources, we need IRSA (IAM Roles for Service Account). We have a service account in Kubernetes and map it to an IAM role.

AppMesh

AppMesh is AWS’ Envoy based service-mesh offering supporting Kubernetes cluster, ECS service and even EC2 instance. AppMesh’s control plane is a managed AWS service, with a controller running on the Kubernetes cluster. To install AppMesh on the cluster:

On the EKS cluster, install AppMesh Controller using Helm
Associate the cluster with IAM OIDC provider
Create an IAM role for the appmesh-controller service account

After these steps, you can create a mesh using CloudFormation, Terraform, etc. The data plane (Envoy proxy) can run on Kubernetes (as sidecar). Traffic between control plane and data plane can go through private link (Interface VPC endpoint) for added security. Like Istio, AppMesh enables mTLS. For observability, you can export Envoy metrics with Prometheus. Coupled with XRay, AppMesh also supports distributed tracing.

AppMesh uses a different set of CRDs than Istio. Key CRDs are:

Mesh: represents an entire service mesh. At mesh level you can configure Egress filter (to allow or deny external traffic) and set IP version (v4 vs v6)
VirtualGateway: a CRD that represents an Ingress in to the Mesh. A virtual gateway allows resources that are outside of your mesh to communicate to resources that are inside of your mesh. A virtual gateway references Envoy proxy deployment by podSelector. It references GatewayRoutes by namespaceSelector, and optionally gatewayRouteSelector. You also specify listeners in the manifest to reference Envoy proxy Service (LoadBalancer Type).
GatewayRoute: A gateway route is attached to a virtual gateway and routes traffic to an existing virtual service. If a route matches a request, it can distribute traffic to a target virtual service. In the manifest, you specify a list of httpRoute, each with matching condition and action. In the action section you can specify virtualService as target.
VirtualService: an abstraction of a real service provided by a virtual node directly or indirectly by means of a virtual router. Dependent services call your virtual service by its virtualServiceName, and those requests are routed to the VirtualNode or VirtualRouter that is specified as the provider for the VirtualService.
VirtualRouter: Virtual routers handle traffic for virtual services. In a virtual router manifest, you can define Route to direct incoming requests to virtual nodes as target.
VirtualNode: A virtual node acts as a logical pointer to a particular task group (i.e. ECS service, Kubernetes deployment). It represent a Service in the AppMesh. In the manifest, you reference Pods by podSelector, specify listeners for any inbound traffic that your virtual node expects, and specify serviceDiscovery for your task group.

You can configure those Custom Resources using YAML manifests (and check the API reference a lot). Alternatively, you can configure them from AWS CLI or AWS console. The console will help you visualize what can be configured. For further details on how these CRs play together, there is a workshop for AppMesh.

EKS cluster using Terraform

Officially, there is an EKS blueprint project for provisioning EKS cluster in Terraform.

I also keep my own Terraform code in the AWS directory of cloudkube project. It works out to be a little more complex than my Terraform template to create Azure Kubernetes Cluster (Azure directory). Because I had to create Cognito resources with initial credential to allow users to connect to cluster without using the implicit master account.

Below is the diagram of the processes.

Create EKS cluster with Terraform module

The template configures kubectl access on a Bastion host, which assumed the same role that our IAM user uses to create the Kubernetes cluster. Therefore, the IAM role is the master identity.

Note that the IAM user (power-user) has very powerful permissions. Usually it is ideal to assign lots of permission to IAM Roles (temporary credential) instead of IAM user (long-term credential). So the role chaining would look like:

The IAM user that Terraform uses has no permission other than assuming a “PowerUser” role
The PowerUser role trusts the IAM user. It also has the permission to assume the “EKS-Manager” role
The EKS-Manager role trusts PowerUser’s role session.

However, the role chaining scenario above is not currently supported in Terraform.

I use a Bastion host because the cluster endpoint is on private subnet. The bastion host is on a public subnet. However, if we do not like public subnet and public IP, we can place the bastion host on a private subnet, and use SSM system manager agent with SSH tunnel plugin to have SSH access to private bastion host.

Summary

I first came across this article about EKS and its awfulness and then decided to check out EKS. I’m not sure all points are still valid but it’s generally real-life experiences. There are also many peripheral services, such as AMP (AWS Managed Prometheus), AMG (AWS Managed Grafana), ADOT (AWS Distro for Open Telemetry), AppMesh (Another Envoy-based Service Mesh, easier to manage than Istio but less Powerful), with a lot to explore.

Istio Operation Gotchas

Sat, 19 Mar 2022 11:09:00 -0400

In this post I discuss a few aspects when putting istio in operation.

Installation

Istio installation can be confusing, due to architectural and guideline changes as well as renaming of operator CRDs since its release, and especially since 2020. This left lots of information outdated on the web, adding to Istio’s perceived complexity.

Currently, the recommended installation methods are istioctl or Helm. Using Istio Operator manifest (with out istioctl) is discouraged. As to the Helm chart installer, it was once deprecated (around early 2020), but was later re-introduced in the fall of 2021. This back-and-forth had caused some aversion. As of Nov 2021, their re-introduced Helm charts version dropped alpha tag. The Helm repo consists of separate Helm charts, for Istio CRD (base), control plane (istiod), each gateway and CNI respectively. A typical deployment therefore requires multiple Helm Releases (example here). Istio document still considers Helm support as alpha, so I assume the most reliable method to install Istio is istioctl.

The istioctl utility can be used with many options to customize Istio install. For example, we can supply a YAML declaration input (to -f switch) to customize installation behaviours. The YAML file declares a CRD. Two different CRDs have been used: IstioOperator and IstioControlPlane. According to this blog and this post, since Istio 1.5 in early 2020, we’re supposed to IstioOperator CRD exclusively. The IstioControlPlane CRD is left only for legacy support. As stated in the current documentation:

The istioctl command supports the full IstioOperator API via command-line options for individual settings or for passing a yaml file containing an IstioOperator custom resource (CR).

With IstioOperator CRD, we still have a number of options to tweak the install behaviours. Here is a summary of potential options:

use IstioOperator API via IstioOperator CRD (without using “values” or overlay fields)
specify an attribute value in argument, including a pre-built profile e.g. –set meshConfig.accessLogFile=/dev/stdout, –set profile=demo
use K8sObjectOverlay by using “k8s/overlays/patches” field in IstioOperatorCRD
use Helm API by using “values” field in IstioOperatorCRD

The key-value specified in –set switch overrides the same key-value supplied in the IstioOperator CRD. So option 2 overrides option 1. The value for profile can also be empty if you’d rather start from scratch. However too many –set switches makes the command wordy so we should build our own IstioOperator CRD

For option 4, the document hyper-links Helm API to a section from version istio 1.4, and I appears to exist only for legacy (pre-2020 Helm support) compatibility. Option 3 (K8sObjectOverlay) would be helpful when a field cannot be conveniently customized with option 1 and we have to patch the object like in Kustomization.

So the most practical approach is IstioOperator CRD for per-component customization, potentially with K8sObjectOverlay. No matter which option, istioctl compiles the installation manifest before applying it against Kubernetes API. This manifest can be previewed using “istioctl manifest” command, so that you can take a look before installation.

Thank you Isito for so much confusion just to land on a working installation method. Below is the content of az-istio-operator.yaml file that I use for my installation:

apiVersion: install.istio.io/v1alpha1
kind: IstioOperator
metadata:
 name: istio-install-customization
spec:
 profile: default
 hub: docker.io/istio
 tag: 1.13.1
 revision: 1-13-1
 namespace: istio-system
 meshConfig:
 accessLogFile: /dev/stdout
 outboundTrafficPolicy:
 mode: "REGISTRY_ONLY"
 components:
 pilot:
 k8s:
 hpaSpec:
 maxReplicas: 7
 minReplicas: 1
 nodeSelector:
 beta.kubernetes.io/os: linux
 ingressGateways:
 - name: istio-ingressgateway
 #namespace: istio-ingress
 enabled: true
 label:
 istio: ingressgateway
 k8s:
 hpaSpec:
 maxReplicas: 11
 minReplicas: 1
 serviceAnnotations:
 service.beta.kubernetes.io/azure-load-balancer-internal: "true"
 service.beta.kubernetes.io/azure-load-balancer-internal-subnet: "my-lb-subnet"
 egressGateways:
 - name: istio-egressgateway
 enabled: true

I can preview the install, run the install and validate installation status:

$ istioctl manifest generate -f az-istio-operator.yaml
$ istioctl install -f az-istio-operator.yaml -y --verify
$ istioctl verify-install -f az-istio-operator.yaml
$ kubectl -n istio-system get IstioOperator installed-state-istio-install-customization-1-13-1 -o yaml | less

Note that in the IstioOperator declaration I marked the revision. This is helpful when I run multiple versions of control plane (e.g. during upgrade). I can check revisions of istiod with:

$ istioctl x revision list

We can delete installed istio components

$ istioctl x uninstall -f az-istio-operator.yaml
$ istioctl x uninstall --revision 1-11-5

In practice, it is helpful to use separate operators each for a different component (pilot, ingressGateways, egressGateways). This makes maintenance and upgrade easier.

Debugging

The documentation has a page for common problems that one needs to be familiar with. It covers not only problems, but also steps to troubleshoot each kind of problem (e.g. authorization policy).

Although istioctl is pretty confusing as an installation tool, it is a good utility for many troubleshooting activities. We should probably add its path to PATH environment variable and add the export command (e.g. export PATH=”$HOME/istio/bin:$PATH“) to .zshrc or .bashrc. Istioctl has a few useful subcommands, some of which are only available as experimental and therefore needs to be following an x. Some common commands are given below:

To analyze Istio problems:

$ istioctl analyze -n istio-system

To look at proxy configuration of an Envoy instance at different levels, use proxy-config sub-command or pc for shorthand:

$ istioctl proxy-config <clusters|listeners|routes|endpoints|bootstrap|log|secret|stats>
$ istioctl pc cluster deploy/istio-ingressgateway -n istio-system # see what Envoy cluster an ingress gateway knows about
$ istioctl proxy-config log deploy/httpbin --level "rbac:debug"
$ istioctl pc log <pod_name> -n <namespace> --level connection:debug
$ istioctl pc secret -n istio-system deploy/istio-ingressgateway # check certificates loaded to a gateway
$ istioctl proxy-config listeners deploy/istio-ingressgateway -n istio-system # query envoy listener configuration
$ istioctl pc routes deploy/istio-ingressgateway -n istio-system --name http.8080 # query envoy route configuration

The last two commands set logging level to the specified workload. If we want to set logging level at mesh level, we can use these commands:

$ istioctl admin log --level authorization:debug
$ istioctl admin log

To look at synchronization status of each envoy in the mesh, use proxy-status sub-command, or ps for shorthand:

$ istioctl ps # ensure data plane is in sync

If an item for a workload shows STALE instead of SYNCED, it means that the configuration has not been pushed from control plane to that instance of Envoy proxy. Check if the Istio configuration change is valid. If the system is newly installed and there is no ingress or egress gateway resources declared, the RDS column for ingress or egress may show “NOT SENT”. The far right column displays the version of istiod connected.

To describe applied istio config:

$ istioctl describe <pod|service>
$ istioctl describe po workload1 -n my-workload # detect misconfigurations on workload

To view dashboard:

$ istioctl dashboard <envoy|grafana|prometheus>

To check authorization policy on a Pod,

$ istioctl x authz check mypod -n workload

To validate istio configuration in a file:

$ istioctl validate -f resource_authorization_policy.yaml

Sometimes we need to turn on access logging just on the envoy proxy on the Gateway Pod. In that case, we will need to apply Istio’s Envoy filter object. This filter is applied to Pods labelled as gateway. It patches the existing filter chain with the additional defined in the manifest:

apiVersion: networking.istio.io/v1alpha3
kind: EnvoyFilter
metadata:
 name: hcm-gw-access-log
 namespace: istio-system
spec:
 workloadSelector:
 labels:
 istio: ingressgateway
 configPatches:
 - applyTo: NETWORK_FILTER
 match:
 context: GATEWAY
 listener:
 filterChain:
 sni: demo.digihunch.com
 filter:
 name: "envoy.filters.network.http_connection_manager"
 patch:
 operation: MERGE
 value:
 typed_config:
 "@type": "type.googleapis.com/envoy.extensions.filters.network.http_connection_manager.v3.HttpConnectionManager"
 access_log:
 - name: envoy.access_loggers.file
 typed_config:
 "@type": "type.googleapis.com/envoy.extensions.access_loggers.file.v3.FileAccessLog"
 path: /dev/stdout
 format: "[%START_TIME%] \"%REQ(:METHOD)% %REQ(X-ENVOY-ORIGINAL-PATH?:PATH)% %PROTOCOL%\" %RESPONSE_CODE% %RESPONSE_FLAGS% \"%UPSTREAM_TRANSPORT_FAILURE_REASON%\" %BYTES_RECEIVED% %BYTES_SENT% %DURATION% %RESP(X-ENVOY-UPSTREAM-SERVICE-TIME)% \"%REQ(X-FORWARDED-FOR)%\" \"%REQ(USER-AGENT)%\" \"%REQ(X-REQUEST-ID)%\" \"%REQ(:AUTHORITY)%\" \"%UPSTREAM_HOST%\" %UPSTREAM_CLUSTER% %UPSTREAM_LOCAL_ADDRESS% %DOWNSTREAM_LOCAL_ADDRESS% %DOWNSTREAM_REMOTE_ADDRESS% %REQUESTED_SERVER_NAME% %ROUTE_NAME%\n"

The object above enables access logging on the Gateway Pods only, without impacting other Envoy proxies.

Multi-tenancy

In large enterprises, Istio is usually installed by a platform/operation team. The entire platform is shared by multiple application teams. Istio should not be seen as a responsibility of a single party. It is necessary to break down the Istio CRDs and define the responsibility of each CRD. For example:

Gateways are placed in the istio-system namespace (or a dedicated istio-ingress namespace in some case). Platform team can decide whether a Gateway is considered a shared infrastructure, or each tenant (application team) uses their own Gateway. In the servers/hosts field of Gateway declaration, add namespace before host to suggest that the routing behaviour of that host must be defined in a certain namespace.
Virtual Services can be managed in two models as well. They can be managed individually and are all placed in each tenant namespace. Alternatively in a shared responsibility model, Virtual Service can be created in istio-system namespace, and the processing of each match can be delegated to a Virtual Service in each tenant namespace, using the Delegate feature of Virtual Service. Another field that can help with multi-tenancy is the “gateways” field, you can specify a value of mesh to indicate the virtual service is available to the entire mesh.
Destination Rules are usually placed in each Tenant’s workspace
Peer Authentication also depends on the configuration. If a mesh level configuration is enforced, it is easier for the Platform Team to manage it and this should be the setup for new clusters. If for historical reasons Peer Authentication is enforced per tenant namespace, it can be delegated to each application team. It can make communication troubleshooting more complex.
Control Plane and observability workloads such as Kiali are usually the responsibility of Platform team.
Request Authentication and Authorization Policy should be the responsibility of individual application team.

In a multi-tenancy management model, Istio related resource should be subject to admission control policy, as well as scrutiny by the security and platform teams. Google Anthos has a good page on the constraint templates for Istio resources.

As to restricting traffic between namespaces, apart from the measures from this previous post, we can also use Sidecar CRD to restrict outbound traffic. As its documentation states:

Sidecar describes the configuration of the sidecar proxy that mediates inbound and outbound communication to the workload instance it is attached to. By default, Istio will program all sidecar proxies in the mesh with the necessary configuration required to reach every workload instance in the mesh, as well as accept traffic on all the ports associated with the workload. The Sidecar configuration provides a way to fine tune the set of ports, protocols that the proxy will accept when forwarding traffic to and from the workload. In addition, it is possible to restrict the set of services that the proxy can reach when forwarding outbound traffic from workload instances.

The documentation page also includes two examples. The first is a sidecar at the mesh level that restricts outbound traffic to the same namespace that the sidecar is in, and the istio-system namespace:

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
 name: default
 namespace: istio-config
spec:
 egress:
 - hosts:
 - "./*"
 - "istio-system/*"

The second example overrides the mesh level default above, and allows egress traffic to three specified namespaces:

apiVersion: networking.istio.io/v1beta1
kind: Sidecar
metadata:
 name: default
 namespace: prod-us1
spec:
 egress:
 - hosts:
 - "prod-us1/*"
 - "prod-apis/*"
 - "istio-system/*"

As to inbound control, we can expose a Virtual Service to other namespaces by using the exportTo field to specify which other namespaces the Virtual Service should be exported to. If no namespaces are specified then the virtual service is exported to all namespaces by default.

Sometimes we want a virtual services to expose to both outside of the mesh via Ingress, and within the mesh, and we hope to use the same hostname. For this requirement, we can use the ServiceEntry CRD. ServiceEntry enables adding additional entries into Istio’s internal service registry.